1. If you need to write down the serial number or just view the hard disk information without disassembling the computer, this can be done with a single command. The serial number is a unique number assigned to the hardware by its manufacturer. It is used for identification and inventory.
2. Jul 19, 2018  To find Hard Disk Serial Number in Windows 10, do the following. Open an elevated command prompt. Type or copy-paste the following command: wmic diskdrive get Name, Manufacturer, Model, InterfaceType, MediaType, SerialNumber. In the output, you'll see the model, name, and serial number listed for the installed hard drives.
3. How to Find Serial Number of Hard Drive in Windows Information Sometimes abbreviated as Serial No., SN or S/N, a serial number is a unique number assigned to the PC by the OEM (Original Equipment Manufacturer) used for identification and inventory purposes.

Hard Disk Serial Number Changer. There are a few free tools around capable of changing the volume serial number and one of them is called Hard Disk Serial Number Changer. The name is a bit misleading though as it doesn’t actually change the hard disk serial number but the volume serial number which is different. I want to get hard disk serial number. How I can I do that? I tried with two code but I am not getting StringCollection propNames = new StringCollection; ManagementClass driveClass = new. Under normal circumstances, the number can only be changed by formatting the drive. But Hard Disk Serial Number Changer takes care of this matter easily and efficiently. This is a portable. Hard Disk Serial Number Changer. There are a few free tools around capable of changing the volume serial number and one of them is called Hard Disk Serial Number Changer.The name is a bit misleading though as it doesn’t actually change the hard disk serial number but the volume serial number.

The volume label of a drive isn't usually an important piece of information, but it can be when executing certain commands from the Command Prompt.

For example, the format command requires that you enter the volume label of a drive you're formatting, assuming it has one. The convert command does the same. If you don't know the volume label, you can't complete the task.

The volume serial number is less important but could be a valuable piece of information in some specific circumstances.

Follow these quick and easy steps to find the volume label or volume serial number from the Command Prompt.

The steps described below apply to Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP.

How to Find a Drive's Volume Label or Serial Number From the Command Prompt

1. In Windows 10 and Windows 8, you can find Command Prompt by right-clicking the Start button. In older versions of Windows, either search the Start menu for cmd or find Command Prompt in the Accessories folder of the Start menu.

   A regular Command Prompt is fine; you don't need to open an elevated one.

   If Windows isn't accessible, Command Prompt it is also available from Safe Mode in all versions of Windows, from Advanced Startup Options in Windows 10 and Windows 8, and from System Recovery Options in Windows 7 and Windows Vista.

2. At the prompt, execute the vol command as shown below, and then press Enter:

   Change c to whatever drive you want to find the volume label or serial number for. For example, if you want to find this information for the E drive, type vol e: instead.

3. Immediately below the prompt, you should see two lines similar to the following:

   As you can see, the volume label for the C drive is System and the volume serial number is C1F3-A79E.

   If you instead see Volume in drive C has no label then it means exactly that. Volume labels are optional and your drive happens to not have one.

   
   

4. Now that you've found the volume label or volume serial number, you can close Command Prompt if you're finished or you can continue executing additional commands.

Other Ways to Find the Volume Label or Serial Number

Using the Command Prompt is the fastest way to find this information but there are other methods, too.

One is to use a free system information tool like the free Speccy program. With that program, in particular, find the Storage section and pick the hard drive you want the information for. Both the serial number and specific volume serial numbers are shown for each drive.

Another way is to use the drive's properties from within Windows. Hit the WIN+Ekeyboard shortcut to open the list of hard drives (if you're using Windows 10, also choose This PC from the left).

Next to each drive is the respective volume label. Right-click one (or tap-and-hold) and choose Properties to see it there, too, and to change the drive's volume label.

I want to get hard disk serial number. How I can I do that?I tried with two code but I am not getting

In this one I am not getting any Unique Serial number.
And Second one is

Here I am getting VolumeSerialNumber. But it is not unique one. If I format the hard disk, this will change. How Can I get this?

Muhammad SaqibJobyJoby

10 Answers

Hm, looking at your first set of code, I think you have retrieved (maybe?) the hard drive model. The serial # comes from Win32_PhysicalMedia.

/azure-powershell-msi-install.html. Get Hard Drive model

Get the Serial Number

Hope this helps :)

hims056

I have used the following method in a project and it's working successfully.

you can call the above method as mentioned below,

If you need a unique identifier, use a combination of these IDs.

SencySencyhuoxudong125huoxudong125

Use 'vol' shell command and parse serial from it's output, like this.Works at least in Win7

Tot Zam

The best way I found is, download a dll from here

Then, add the dll to your project.

Then, add code:

Then, call the hard disk ID from where you need it

Note: go to properties of the dll in explorer and set 'Build action' to 'Embedded Resource'

Brian Webster

Serial Number Of Hard Drive Windows 7

Below a fully functional method to get hard disk serial number:

lxg

Serial Number Of Seagate Hard Disk

Here is a solution using win32 api and std string in case you need your application to run on a OS with no CLR. I found it here on github.

In case you want to use it for copy protection and you need it to return always the same serial on one computer (of course as far as first hdd or ssd is not changed) I would recommend code below. For ManagementClass you need to add reference to System.Management. P.S. Without 'InterfaceType' and 'DeviceID' check that method can return serial of random disk or serial of USB flash drive which connected to pc right now.

Serial Number Of The Hard Disk Time

Seagate Hard Drive Model Number

Not the answer you're looking for? Browse other questions tagged c#hard-drive or ask your own question.